The moment a team fight breaks out, my FPS would tank from 140 to 90, and the stutter was so jarring it actually made me twitch. Looking at the data, the DeepCool AK620's fan response was too sluggish, causing CPU temps to bounce between 70-85℃, which triggered the clock speeds to jump up and down constantly. I wasted an entire hour tweaking my RAM timings thinking the memory was unstable, but the frames kept swinging between 80-130 FPS—a total rookie mistake. I went into the BIOS and slashed the fan step response time from 2 seconds down to 0.1 seconds and tightened the mounting pressure on the cooler base. RTSS showed my core temp variance shrink from 15℃ to just 4℃, and my minimums climbed from 82 FPS to 115 FPS. The fans were 'hunting' and ramping up and down like crazy at first, but adding a 3℃ hysteresis interval smoothed everything out. Temps now sit at 65-72℃. The frame time graph is finally a straight line. Last updated onApril 11, 2026 12:50 PM.
Is my Fanxiang S910Max 1TB SLC cache filling up and causing frame drops during scene transitions?
AI FiltersThe moment a fancy transition animation hits, the frame rate turns into a slideshow—it's enough to make you shake with frustration. I noticed the Fanxiang S910Max 1TB's dynamic cache was choking on 4K assets, with write speeds plummeting from 10000MB/s to a pathetic 800MB/s. I spent an hour messing with CPU thread priorities thinking it was a scheduling issue, but the frames kept jumping wildly between 35 and 110 FPS—a total waste of my afternoon. I then went into the storage management panel, changed the write cache policy from Auto to Forced Flush, and over-provisioned 15% of the drive. CrystalDiskMark showed random writes moving from 40-50MB/s up to 70-80MB/s, and my 1% lows jumped from 28 FPS to 62 FPS. I hit some weird stutters during game saves after the first tweak, which only stopped once I disabled my real-time antivirus. Temps are stable at 58-65℃. The frame time graph is finally a straight line, and fans are humming at 1800-2100RPM. Mode switched. Last updated onApril 14, 2026 4:52 PM.
The second a flashy summon appeared, my frame rate turned into a slideshow. It was infuriating until I realized my Asgard Bragi II DDR5 6000 was running in single-channel mode because I messed up the slot placement, cutting my bandwidth down to a pathetic 25-29GB/s. I spent an entire hour updating GPU drivers three times thinking that was the issue, while my FPS was wildly swinging between 40 and 110. Total waste of time. I reseated the sticks into the correct slots to enable dual-channel and locked the frequency at 6000MHz. CPU-Z showed bandwidth skyrocketing to 52-56GB/s, and my 1% lows jumped from 30 FPS to 65 FPS. I actually had a moment of panic when the PC wouldn't post after the first reseat, but a quick look at the motherboard manual fixed it. CPU temps are around 68-74℃ and memory is at 50-55℃. The frame time graph is finally a straight line, though it's a lesson learned on checking the manual first. Last updated onApril 19, 2026 11:24 AM.
The second my base grew, the frame rate turned into a slideshow. It was almost impressive how bad it got. I checked my specs and realized my Kingbank Yin Jue 32GB was running in single-channel mode because I messed up the slots, cutting my bandwidth down to a pathetic 22-26GB/s. I spent an hour updating GPU drivers three times thinking that was the issue, while my FPS was wildly jumping between 45 and 115—what a complete waste of time. I ripped the RAM out, reseated them in the correct slots for dual-channel, and locked the frequency at 3600MHz. CPU-Z showed bandwidth instantly leaping to 44-48GB/s, and my 1% lows jumped from 32 FPS to 68 FPS. I actually failed to boot the first time I tried moving them until I finally read the motherboard manual. CPU temps are now steady at 65-71℃ and the game is finally playable. The in-game performance overlay shows a flat frame time curve, with RAM temps sitting at 52-56℃. Last updated onApril 29, 2026 2:42 PM.
The second a teamfight broke out, my screen turned into a slideshow. It was almost funny how bad it was. I checked my specs and realized my ASRock Z370M Pro4 was running in single-channel mode, cutting my bandwidth down to a pathetic 21-25GB/s. I spent an hour updating my GPU drivers three times thinking that was the issue, but the FPS kept jumping between 40 and 110—what a complete waste of time. I reshuffled the RAM sticks to ensure dual-channel was actually active and bumped the frequency from 2400MHz to 3000MHz. CPU-Z showed the bandwidth jumping to 42-46GB/s, and my 1% lows in fights went from 38 FPS to 72 FPS. I actually messed up the slot placement the first time and the PC wouldn't even POST until I read the manual. Now the CPU stays around 62°C - 68°C and the flow is perfect. The in-game performance overlay shows a flat frame time line, and the motherboard is idling at 45°C - 50°C. Last updated onApril 10, 2026 4:48 PM.