GamePP Frequently Asked Questions

GamePP Config Prediction shows current setup 4K Apex Legends ~80FPS, Stress Test Beta detected CPU 92°C triggering Thermal Throttling in combined bake-in. 1. Open 'Computer Benchmark' module 'Config Prediction' tab;2. Select 'Custom mainstream config' or manually edit CPU/GPU;3. Set resolution 4K, check Apex Legends prediction;4. Click 'Compare current config' to view FPS curve;5. Switch to 'Stress Test (Beta)' tab;6. Choose 'Combined Temperature Stress', custom stress 80%, duration 15 min;7. Click 'Start Test' while monitoring Hardware Monitoring live temp/power;8. If temp >85°C during test, pause and adjust cooler fan curve (via Hardware Monitoring);9. After test, export detailed report, confirm no BSOD/crash;10. Return to config prediction, simulate memory upgrade then re-predict Apex Legends 4K FPS;11. Cross-verify with 'Hardware Evaluation' GPU Frame Time Min 1%;12. Save report, alternative path: if unstable, lower stress to 50% and retest. Before/after: 4K predicted FPS 80→110 (post-simulated tweak), peak bake temp 92°C→78°C, 1% Low FPS stable no drops. Based on GamePP official documentation and community player experience, summarized by GamePP senior technical expert, last updated on 2026-02-15.

Problem ID: GamePP hardware monitoring detects sustained high cooler temperature under load triggering Thermal Throttling and CPU Spike. Solution: 1. Open the main interface and click the Hardware Monitoring module icon on the left; 2. In Hardware Information tab click Rescan and open sensor details for specific cooler temperature sensors; 3. Switch to Desktop Monitoring tab, select Tech preset panel and check cooler temperature, CPU temperature, GPU temperature simultaneously; 4. Switch to In-Game Monitoring tab, select Advanced Small Plane Mode and enable OLED burn-in protection; 5. Drag Refresh Time slider to 1.5 seconds and check panel edge snap; 6. Click Custom Hotkey button to set Ctrl+Shift+H for hide and Ctrl+Shift+T for show; 7. Launch game and press hotkey to summon panel for real-time cooler curve observation; 8. Switch to Computer Benchmarking module and run cooler-temperature-related stress test; 9. Set 80% pressure value for 15 minutes and export report; 10. Return to Lab (Beta) tab and record 20-minute full-dimension cooler data for cross-validation; 11. Fine-tune case fan curve or cooler mounting based on curve; 12. Save config and restart game to test high-settings long-session stability. Data Insight: After optimization cooler temp drops 9°C, Thermal Throttling fully eliminated, 1% Low FPS improves by 23, frame time shortens by 5ms. Based on official documentation and community player experience, GamePP senior technical expert summary, last updated on 2026-02-19

Solutions for hardware detection failure during startup: ① Check the computer's hardware connections (e.g., whether the graphics card and memory are properly seated), reinsert them and try again; ② Enter the BIOS to confirm that hardware (such as CPU and GPU) is not mistakenly disabled; ③ Uninstall and reinstall GamePP, and select 「Run as Administrator」 during installation, which usually resolves driver-level hardware detection issues.

"To preview effects: ① Switch to preview mode with AMD RX 7900 XT config; ② Load Battlefield 6 frames; ③ Tweak parameters and apply to the game for clarity checks."

1. Enter "2Ha AI" - "Peripheral Dynamic Lighting Control"; 2. Detect connected RGB keyboards; 3. Select kill effect "Skull"; 4. Once enabled, it automatically triggers on kills in Naraka: Bladepoint.