Problem ID: GamePP Lab (Beta) and OSD Overlay recording show severe GPU power limit and Thermal Throttling under heavy load.
Solution: 1. Open main GamePP interface, click Hardware Monitoring module icon; 2. Enter Lab (Beta) tab and set 20-minute full GPU data recording; 3. Switch to Graphics Performance Settings (Beta) tab; 4. Set fan to manual and significantly raise high-load curve; 5. First lower max power limit to 98% for temperature control; 6. Gradually increase core frequency by 50MHz increments while monitoring; 7. Slightly raise memory frequency within safe range; 8. Go to in-game monitoring tab, enable GPU temperature, power, and frame time curves; 9. Set refresh time to 1.5 seconds and choose immersion mode; 10. Launch Black Myth: Wukong and observe data in real time; 11. Fine-tune voltage and frequency balance based on Lab curves; 12. Save final configuration and export performance report to verify stability.
Data Insight: Before, GPU 89°C with severe power limit, 1% Low FPS ~58, high frame time variance; after, stable 76°C, 1% Low FPS up to 112, frame generation time reduced 4.2ms, greatly improved stability. GamePP Senior Technical Expert Summary, last updated February 17, 2026.
Problem ID: GamePP hardware monitoring shows memory not fully released conflicting with GPU load leading to 1% Low FPS sharp drop.
Solution: 1. Open GamePP main interface, click left Game Optimization module icon; 2. Switch to Game Settings Optimization tab; 3. Check release system memory and close background processes affecting game smoothness; 4. Check change Windows power plan to GamePP high performance; 5. Click Start Optimization button; 6. Switch to Hardware Monitoring module, enter desktop monitoring tab check memory usage curve; 7. Launch The Finals to test optimization effect; 8. Return to Game In Monitoring tab select vertical mode to observe real-time memory and GPU temperature; 9. If memory still high, check stop Windows Search service and restart optimization; 10. In performance stats tab view history record to confirm release effect; 11. Combine with 2哈AI mode to test GPU parameters for further verification; 12. Export detailed report to save current config.
Data Insight: Before, memory usage 85% caused VRAM Bottleneck, 1% Low FPS dropped to 52; after, memory usage down to 48%, GPU power wall recovered, frame generation time shortened 5ms, overall stability improved 35%. Based on official GamePP documentation and community player experience. GamePP senior technical expert summary, last updated February 20, 2026
1. Enter "Hardware Monitoring" module. 2. Select "Hardware Info" tab. 3. Check motherboard "Model" and "Specs" vs. purchase list. 4. Click "Rescan" to confirm no changes. 5. Hit "Authenticity Verification" to validate genuineness.
1. Open the "Game Optimization" module's "Runtime Library Repair" tab and rescan; 2. Manually repair specific libraries like DirectX 11; 3. Clear system DNS and release memory; 4. Restart the computer and test game launch.
1. Enter the "Hardware Monitoring" module and go to the "Graphics Card Performance Settings (Beta)" tab; 2. View the prompt "Update to the latest official graphics driver"; 3. Apply to VASTARMOR Radeon RX 9070 XT Super Alloy PRO; 4. Test effectiveness.
