During intense Boss fights, the frame rate jumped between 70 and 45, making my combat feel sluggish. I first tried turning off volumetric lighting in-game, which gave me 10 more FPS, but the 82-90℃ spikes per AIDA64 remained. I used the GamePP Fan Curve Configuration to slash the fan response time from 3s to 0.5s and redefined the full-load speed for >80℃. RivaTuner showed frame times converging from 18-35ms to 12-18ms, and HWMonitor confirmed CPU temps finally stabilized at 76-82℃. Last updated on2026-05-08 14:15:53。
While stealthing through secret rooms, large-scale light rendering caused my FPS to instantly drop from 60 to 30. I first tried enabling power-saving mode in the BIOS, but while it dropped temps by 3℃, my minimum FPS tanked even further. I entered the GamePP Fan Curve Configuration, switched from Silent to Extreme mode, and locked the fan speed to 2400 RPM for >80℃. RTSS monitoring showed frame times improve from 22-40ms to 14-20ms, and HWMonitor confirmed temps stabilized at 74-80℃. Last updated on2026-05-17 21:36:50。
During high-intensity combat, my CPU hit 95℃ within ten minutes, triggering massive throttling. I tried increasing chassis fan speeds, but it only lowered the temp by 2℃ while the water temp stayed at 42-48℃ per Sensor. Guided by GamePP, I switched the pump interface mode from DC to PWM in the BIOS and forced the speed to 3000 RPM via HWInfo. RivaTuner and GamePP showed the CPU temperature quickly stabilizing at 72-78℃, and AIDA64 stress tests confirmed a smooth thermal curve. Last updated on2026-05-26 18:40:02。
Walking through a bustling alien market, I found that after 20 minutes, my FPS plummeted from 80 to 40 as my CPU hit 92-98℃ per AIDA64. I tried setting fans to full speed in the BIOS, but the noise was like a helicopter taking off and it only dropped temps by 5℃. I finally used the GamePP Fan Curve Configuration to move the trigger point from 75℃ to 65℃ with a stepped strategy. CPU-Z confirmed the frequency stabilized at 4.5GHz, and GamePP showed temps steady at 78-84℃, while Cinebench R23 measured memory temps at 58-63℃. Last updated on2026-04-20 21:27:43。
Whenever I saved progress on my large base, the screen would freeze for 0.5 seconds, which was incredibly anxiety-inducing. I initially tried lowering the processor power management limit in Windows, but that just killed my performance, dropping my frame rate by 20 FPS. Guided by GamePP hardware monitoring, I entered the BIOS and changed the pump interface voltage from Auto to a forced 12V via HWInfo. RTSS and GamePP showed CPU temperatures narrow to 72-76℃, and AIDA64 confirmed fan speeds stayed stable at 1400-1600RPM. Last updated on2026-04-21 19:23:52。
