GamePP Frequently Asked Questions

I thought 16GB was plenty, but in massive raids, usage hit 96% instantly, and my clock speeds tanked from 4.4GHz to 3.1GHz. I tried dropping the graphics to the absolute minimum, but it only gave me 8 more FPS and the game looked like a blurry mess—totally frustrating. I ended up rebuilding my virtual memory setup, switching from 'System Managed' to a manual 24GB page file on my fastest SSD. HWiNFO showed swap frequency dropping from 15 times per second to just 4, and frame times tightened from 22-58ms to 16-21ms. I made the mistake of putting the page file on an HDD at first, which made the lag even more unbearable until I moved it to the SSD. CPU temps stayed at 66-72℃ and RAM at 45-51℃. The memory scheduling is way more efficient now, with RAM temps holding steady at 46-52℃. Last updated on2026-05-01 08:47:41。

During fast scene transitions, I was getting random 12-frame drops that felt incredibly jarring. I ran a hardware check and realized that while the RAM was detected, it was running in single-channel mode, cutting my bandwidth in half and creating a massive bottleneck in the rendering pipeline. I tried messing with processor scheduling in Windows, but that was a complete waste of time. I shut everything down, reseated the sticks into slots 2 and 4, and manually enabled Dual Channel in the BIOS. My read speeds jumped from 32GB/s to 58GB/s, and frame times stabilized from 18-32ms to 11-16ms. I actually had a boot failure after the first reseat until I cleaned the gold contacts with an eraser to remove oxidation. CPU stayed at 62-68℃ and VRMs at 54-60℃. Benchmarks confirm full bandwidth is now active, with RAM temps at 54-59℃. Last updated on2026-05-19 14:56:26。

This RAM frequency seemed solid on paper, but under pressure, it was a joke. I had four BSODs in one session, and the error codes looked like random gibberish. I tried killing every single background process, which helped for a bit, but as soon as the action peaked, it crashed again. I decided to just brute-force it by downclocking from 3200MHz to 2933MHz and locking the voltage at 1.35V. In my monitoring panel, the memory error rate dropped from 0.4% to a flat 0%, and frame times stabilized from a messy 8-35ms to a clean 7-14ms. I actually messed up the tRAS parameter during the first attempt, which caused a slight memory overflow and almost panicked me into thinking I'd fried the kit. CPU temps were 66-72℃ and RAM sat at 48-54℃. I logged the voltage curves via system logs, with fans humming steadily at 1400-1600RPM. Last updated on2026-04-20 11:46:56。

Every time a massive team fight broke out, my FPS would plummet from 120 to 40, and the anxiety of missing a spell was real. The default 36-36-36-76 timings on this Gloway 6000MHz kit have some compatibility quirks on certain boards, causing sync delays. I tried the 'Auto Overclock' feature in the software, but that just increased the micro-stutters—a total fail. I went into the BIOS, bumped the voltage from 1.25V to 1.32V, and loosened tRFC from 480 to 520. Using RivaTuner, I saw memory latency stabilize from 72ns to a tight 64-68ns, and my minimums climbed from 35 to 58 FPS. I actually hit 1.35V at first and the RAM temps shot up to 64℃, so I had to set a custom fan curve to kick in at 50℃. GPU stayed at 62-68℃ and VRAM at 76-82℃. Benchmarks show the drops are gone, and the input lag feels non-existent now. Last updated on2026-04-13 16:05:04。

The second I hit a team fight, my memory usage spiked to 98%, forcing the system to lean heavily on the disk swap file, which caused these brutal 100ms freezes. I initially tried nuking all the graphics settings to low, but it only gained me about 5 FPS and the game looked like a pixelated mess, which was honestly a joke. I eventually decided to ditch the automatic virtual memory and manually assigned a 16GB page file specifically to my high-speed NVMe SSD. Checking HWiNFO, the swap frequency dropped from 12 times per second down to 3, and my frame times tightened up from a wild 25-60ms range to a steady 18-24ms. I actually wasted an hour setting the page file on my old HDD first, which just made the stuttering ten times worse until I moved it to the SSD. My CPU stayed around 64-70℃ and RAM sat at 42-48℃. The frame delivery is finally consistent at 18-24ms, though 4GB is still a struggle for 2026 standards. Last updated on2026-04-06 19:56:59。