GamePP Frequently Asked Questions

While speeding through the city, my FPS would plummet from 110 to 40. I was actually hyped when I saw it because I knew exactly why: the Fanxiang S910Max is a furnace. Core temps were hitting 88°C - 94°C, triggering hardware-level throttling. I tried capping the PCIe speed to 4.0 in BIOS, which dropped temps to 60°C but halved my load speeds—totally unacceptable. I ended up swapping to high-grade thermal pads and aggressive M.2 fan curves that hit 100% at 65°C. HWInfo now shows temps stabilized at 58°C - 64°C, and the FPS swing narrowed from 40-110 down to a steady 95-105. Last updated on2026-06-17 12:02:06。

Crashing every single time I enter a city is just absurd; the compatibility between this game and my drive was a total disaster. The Samsung 9100 PRO 2TB runs on PCIe 5.0, but the motherboard signal was dropping packets at a rate of 3-6% during high-frequency bursts, triggering a full kernel panic. I tried disabling all power-saving options, which just bumped my electric bill and actually made the crashes more frequent—a complete waste of time. I updated the BIOS to the latest version and forced the PCIe slot from 'Auto' to 'Gen4'. In 8 consecutive CrystalDiskMark stress ru Last updated on2026-06-17 12:02:05。

Whenever I hit the desert biomes, the loading bar just dies at 80% for several seconds, which completely kills my flow. The SLC cache on my WD Black SN850X 1TB was struggling with these massive sequential reads, with response times jumping wildly between 15ms - 38ms. I wasted time enabling Fast Startup and killing power-saving modes in Windows, but it did absolutely nothing—just a superficial fix for a deep hardware bottleneck. I eventually flashed the latest firmware and flipped the write caching policy to 'Force Flush' in Device Manager. In CrystalDiskMark 4K random read Last updated on2026-06-17 12:02:05。

Distant mountains looked like shattered glass, and the texture popping made stealth gameplay feel completely broken. My Kioxia EXCERIA PLUS G4 1TB, despite being a PCIe 5.0 drive, was hitting latency spikes of 22ms - 45ms when streaming 4K assets. I tried dropping texture quality to Medium, which helped the FPS but the popping stayed—a total letdown after spending an hour tweaking settings. I eventually dove into the BIOS and forced the M.2 slot from 'Auto' to 'Gen4', then slammed the latest chipset drivers. In AIDA64, random reads jumped from 38MB/s to a consistent 52MB/s Last updated on2026-06-17 12:02:05。

I can't even describe the relief when I saw my frame times finally lock in at 14ms! My Asgard Bragi II DDR5 6000 was struggling with asset mapping, and the timings were jumping around in Auto, causing read latency to spike between 70ns and 110ns. I tried the classic 'clear temporary files' routine, but saving 600MB of RAM does nothing for hardware-level latency—just a waste of my time. I went into the BIOS, bumped the memory voltage from 1.35V to 1.38V, and loosened tRAS from 38 to 42. RTSS showed the frame time volatility drop from 16-42ms down to a clean 12-18ms. I had a Last updated on2026-06-17 12:02:04。