When the loading bar stayed stuck at 1% for two straight minutes, I knew this wasn't a software glitch—it was a hardware handshake fail. The older BIOS on the ASRock A320M-HDV R4.0 has this annoying lag when identifying NVMe protocols, stretching boot times to a painful 50-70 seconds. I tried disabling every unnecessary startup item in Windows, but that only shaved off 3 seconds, which felt like a complete waste of time. I ended up flashing the latest official BIOS and toggled Fast Boot to 'Enabled' while disabling the CSM (Compatibility Support Module). Using a boot timer, Last updated on2026-03-14 12:39:06。

Fighting giant machines would trigger a sudden drop from 110 FPS to 55 FPS, along with some nasty input lag. HWInfo revealed the MSI B760M VRMs were hitting a scorching 102C, triggering thermal throttling that tanked my CPU clock from 5,0GHz down to 3,2GHz. I tried undervolting the CPU cores, which dropped temps by 5C, but the 1% lows were still all over the place. I ended up rigging a small 40mm fan to blow directly onto the VRM chokes and capped the PPT power limit in the BIOS from 253W to 180W. This kept the VRMs locked between 78-84C, and the CPU frequency stayed rock s Last updated on2026-04-23 21:23:44。

It's honestly ridiculous trying to run a game like this on an H610 entry board; it's basically a torture test for the hardware. Whenever I entered Saint Denis, the memory controller would just give up on the high-frequency instructions and crash the game without warning. I tried updating the BIOS to the latest version, but that didn't stop the crashes and actually messed up my boot order—a complete waste of time. I eventually went into the BIOS, dropped the RAM speed from 3,200MHz to 2,666MHz, and manually loosened the primary timings from 16-18-18-36 to 18-20-20-42. After Last updated on2026-05-08 19:12:27。

Every time I unleashed a massive ability, my PC would just black out and reboot as if someone pulled the plug—it was incredibly stressful. The event logs pointed to a kernel power failure, and I saw the 12V rail on the Gainward RTX 5070 Ti dip to 11,4V during peaks, which is way below the safe limit. I tried limiting the GPU power target in the BIOS, which reduced the crash frequency but didn't stop the random power-offs. It was a nightmare of trial and error. I finally ditched the daisy-chained pigtail cables and ran three completely independent 8-pin leads from the PSU. I Last updated on2026-03-21 20:39:00。

Trying to run this game is basically a stress test for my patience; frame drops are practically a feature. In dense vegetation, VRAM usage hit a hard ceiling of 15,8GB, forcing the system to swap to slow system RAM, which turned the game into a slideshow. I tried cranking the page file to 64GB to stop the crashing, but I was stuck at 20 FPS, which is just unplayable. I eventually dropped texture quality from 'Ultra' to 'High' and disabled unnecessary ambient occlusion, while enabling VRAM compression in the driver. VRAM usage settled at 12,4-13,1GB, and frame times returned Last updated on2026-03-25 20:54:11。

Back to Top