Why does my DeepCool AK620 respond so slowly during jungle fights in Gray Zone Warfare, causing massive clock drops?

While running large-scale area scans, I noticed my CPU temps spiked from 62°C to 94°C in just ten seconds, causing the clock speed to tank from 5.1GHz to 3.4GHz. The AK620 dual-tower should handle this, but the default thermal logic lags during sudden power bursts, leading to brutal frame time spikes of 40-60ms. I first tried setting the fans to full speed in the BIOS; while it kept temps at 82°C, the resonance noise made my entire chassis shake—completely unbearable. I eventually went back into the BIOS to redefine the step frequency, forcing the 75°C trigger point from 60% up to 85% and slashing the fan start delay from 2 seconds to 0.5 seconds. Monitoring via HWInfo showed core fluctuations locked between 74-81°C, and frame times finally converged to a smooth 14-18ms. I did hit a snag where the fans would 'hunt' or rev up and down under low load at 85%, but tweaking the hysteresis to 0.8 seconds smoothed it out. Heatsink surface temps stayed around 42-46°C. After a stress test, the logic is solid and frame times are a consistent 14-18ms.