GamePP Frequently Asked Questions

Methods to adjust abnormal high power consumption after overclocking: ① Enter 「Overclocking Settings」 - 「Power Limit」 in GamePP and lower the power limit settings of CPU/GPU; ② For Intel CPUs, the 「Energy Efficiency Optimization」 mode can be enabled to limit power consumption while overclocking; ③ Check if the power supply capacity is sufficient; increased power consumption after overclocking may cause power supply overload, so it is recommended to replace it with a higher-capacity power supply.

Methods to set up GPU overclocking for balancing performance and stability: ① Enter 「GPU Overclocking」 - 「Manual Overclocking」 and slightly increase the core frequency (e.g., +10MHz each time); ② Run the 3DMark test after each adjustment; if screen artifacts appear, lower the frequency; ③ The final setting is based on the standard of 「stable game operation for 2 hours without crashes」 to balance performance improvement and stability.

CPUs suitable for one-click overclocking and precautions: ① Only suitable for overclockable CPUs of Intel K-series (e.g., i7-13700K) and AMD X-series (e.g., Ryzen 9 7950X); ② Precautions: a. Ensure the cooling system is sufficiently powerful (water cooling is recommended); b. Verify via the software's 「Stability Test」 after overclocking; c. Monitor the CPU temperature to avoid hardware aging caused by long-term high load.

Frame rate improvement depends on computer hardware configuration. Generally, minor CPU or GPU overclocking can bring 5%-15% game frame rate boosts. Specific explanation: 1. High-performance hardware (e.g., high-end CPU, graphics card) sees relatively smaller improvements; 2. Mid-to-low-end hardware shows more noticeable effects; 3. Different game types have varying hardware demands, leading to differences in frame changes; 4. Use GamePP performance tests to confirm actual post-overclock frame improvements. Overclocking benefits for frames are limited; adjust parameters rationally. 

Saved overclock parameters can apply automatically. Methods: 1. After completing overclock parameter settings in GamePP, click the "Save" button; 2. On computer restart, GamePP will automatically load previously saved parameters; 3. Users can enable or disable "Auto-Start on Boot" in software settings (enabling it allows automatic application); 4. If you don't want to apply saved parameters, manually restore defaults in "Overclocking Settings." Before saving, confirm stable system operation to avoid frequent crashes due to abnormal parameters.