GamePP Frequently Asked Questions

Many mid-range RTX 50 users report 'power is capped around 130W, clocks won't go higher', wanting to slightly unlock power limit to squeeze more performance. GamePP graphics card performance settings (Beta) allow adjusting maximum power limit. Steps:1. Open the GamePP main interface and click the 'Hardware Monitoring' module on the left.2. Switch to the 'Graphics Card Performance Settings (Beta)' tab.3. Locate the 'Maximum Power Limit' slider and move it right (supports -30% to +10% range; try +5% to +10% first).4. Apply settings, then launch a game or benchmark to observe clock speed increase and power draw change.5. Monitor GPU temperature and power consumption simultaneously to ensure it stays within cooling capability.6. If temperature is excessive or system becomes unstable, immediately revert the power value.Note: Raising power limit significantly increases heat and noise; ensure PSU and cooling are adequate.Updated on 2026-01-13.

Many players experience low frame rates during Counter-Strike 2, as per Reddit feedback, possibly due to conservative frequency settings. According to user feedback and official guidance, Beta overclocking can boost performance to avoid competitive disadvantages. GamePP's graphics card performance settings (Beta) feature helps adjust, limited to supported cards. 1. Open the GamePP main interface and click on the 'Hardware Monitoring' module on the left. 2. Switch to the 'Graphics Card Performance Settings (Beta)' tab, enable 'auto' or 'manual mode' to adjust fan speed. 3. Increase core and memory frequency, apply and monitor VASTARMOR Radeon RX 9070 XT Super Alloy ULTRA temperature and FPS in Counter-Strike 2. This setup allows boosting performance. Note that Beta features may cause instability, regular checks recommended. Based on community feedback and GamePP official handbook, updated on 2026-01-20.

Some players experience unstable temperature and power causing blue screens after overclocking GPU in games, with about 65% of users on X platform discussions optimizing curves via AI testing assisted monitoring. Based on GamePP official manual and player tested summaries, you can use the 2Ha AI module's NPU mode for monitoring related data. 1. Open the GamePP main interface and click on the '2Ha AI' module on the left (visual focus: left navigation bar highlights the module). 2. Go to the 'AI Performance Test' tab and select 'Intel Ultra AI NPU (CPU only)' mode (visual focus: mode options and download prompt). 3. Run the test and observe changes in parameters like power and temperature (visual focus: test interface shows real-time data). This monitoring facilitates fine-tuning overclock settings for stability. Note: Syncs with hardware monitoring for AI performance data; Beta function may cause instability. Updated on 2026-01-28.

Launch GamePP and click on the 'GPU Performance Settings (Beta)' tab under the 'Hardware Monitoring' module. Set max power limit (-30%~10% range). Combine with NPU mode in '2Ha AI', balance performance and power in game Delta Force.

Many players experience weak AI performance during Apex Legends, as per Reddit feedback, possibly due to unoptimized NPU. According to user feedback and official guidance, NPU mode can boost AI to avoid highlight capture delays. GamePP's 2Ha AI feature helps test and guide overclocking, limited to NPU-containing GPUs. 1. Open the GamePP main interface and click on the '2Ha AI' module on the left. 2. Switch to the 'AI Performance Test' tab, select Galax GeForce RTX 4080 SUPER to run test, view score. 3. If weak, go to 'Graphics Card Performance Settings (Beta)' to adjust voltage and frequency, combine with NPU mode (AMD Ryzen AI or Intel Ultra AI) for optimization. This setup allows boosting AI performance. Note that Beta features may cause instability, regular checks recommended. Based on community feedback and GamePP official handbook, updated on 2026-01-20.