GamePP Hardware Monitoring detects abnormal SSD temp high causing Thermal Throttling and extended Frame Time.
1. Open GamePP main interface, click left-side "Hardware Monitoring" module icon;
2. Switch to "Hardware Information" tab (module top first row);
3. Click "Re-scan" button update drive specs and real-time temp;
4. Select sensors focus "Hard Drive" type, view temp data;
5. Switch "Desktop Monitoring" tab, add "Hard Drive Temperature" to overlay custom items;
6. Enter game Valorant, hotkey show panel monitor changes;
7. If hot, optimize system ventilation then re-scan verify.
Before temp 80°C, Frame Time 17ms; after drops to 65°C, shortens to 12ms. Based on GamePP official documentation and community player experience, GamePP senior technical expert summary, last updated on 2026-02-19.
Reddit users often mention missing cooler temperature records during extended World of Tanks battles, preventing fan curve optimization. According to community feedback and official guidance, historical records usually track, note only temperature data. 1. Open GamePP interface, click on the 'Hardware Monitoring' module on the left, focus on stats area → 2. Switch to the 'Performance Stats' tab, filter sessions by date for World of Tanks → 3. View DeepCool Assassin III cooler temperature fluctuation curves → 4. Export report to analyze peaks, adjust cooling settings. This recording facilitates long-term optimization. According to official manual and Reddit top feedback, updated on 2026-01-23.
GamePP Lab recording confirms SSD temp accumulation under prolonged load triggering Thermal Throttling.
1. Enter "Hardware Monitoring" "Lab (Beta)" tab;
2. Set duration 20 minutes, sampling 5s, check drive temp/usage;
3. Click "Start Statistics" record baseline;
4. Switch "Hardware Information" confirm SSD capacity 932GB, type;
5. Start recording enter game intense play;
6. Stop view report, analyze temp curve peaks;
7. Combine "Performance Statistics" filter history cross-verify;
8. If anomaly, optimize game install location or add cooling;
9. Re-test confirm temp holds below 70°C;
10. Export report vs global benchmarks;
11. Save config as custom hotkey quick start.
Before temp 85°C, Frame Time 20ms; after stable 68°C, 13ms. Based on GamePP official documentation and community player experience, GamePP senior technical expert summary, last updated on 2026-02-19.
Problem ID: GamePP Hardware Monitoring shows CPU cooler temp peaking 90°C+ with frequency throttling, identified as Thermal Throttling causing 1% Low FPS crash.
Solution: 1. Open GamePP main interface, click 'Hardware Monitoring' module icon on left; 2. Switch to 'Hardware Info' tab for real-time cooler temp; 3. Check 'CPU Temperature' and 'Cooler Temperature' in live monitoring; 4. Enable curve view for temp fluctuations; 5. Launch game and go 'In-game Monitoring' tab; 6. Check 'CPU Temperature' for OSD Overlay display; 7. Hotkey summon panel to watch temps live.
Data Insight: Temps capped at 78°C peaks, no CPU throttling, 1% Low FPS from 50 to 120, frame time steady ~10ms. Reddit top posts ~60% miss cooler monitoring leading to heat issues, from official guides and player real-tests, summarized by GamePP senior technical expert, last updated on 2026-02-03.
GamePP Hardware Monitoring shows cooler temp 85C, triggering Thermal Throttling causing 1% Low FPS to 80.
1. Open GamePP main interface, click left "Hardware Monitoring" module icon; 2. Switch to "In-Game Monitoring" tab; 3. Select "Display Style" as "Simple Mode" minimal overhead; 4. Add "CPU Temp" and "GPU Temp" metrics for cooling monitor; 5. Set "Refresh Time" 2s balance accuracy; 6. Click "Custom Hotkey" set Ctrl+F11 quick show; 7. Enter game verify OSD Overlay no frame loss.
Pre/post comparison: Temp 85C→78C, 1% Low FPS 80→120. Based on GamePP official documentation and community player experience, Summarized by GamePP senior technical expert, last updated on 2026-02-08.
