SSD overheating during loading in game Naraka: Bladepoint often causes slow read/write, per Reddit top posts where players monitor temperature to avoid damage. Note that it supports sensor details view. 1. Launch GamePP and click on the 'Hardware Monitoring' module on the left, confirm entry to monitoring mode. 2. Switch to the 'Hardware Information' tab, locate 'Real-time monitoring of hardware dynamic data' for SSD temperature. 3. Select 'Choose Sensor' to specify SSD; this records data, preventing overheating. Originating from official handbook and player-tested summaries, updated on January 23, 2026.
Problem ID: GamePP hardware monitoring reveals SSD temperature reaching 62°C near Thermal Throttling threshold, causing read speed drop and 1% Low FPS fluctuation.
Solution: 1. Open GamePP main interface, click 'Hardware Monitoring' module icon on the left; 2. Switch to 'Desktop Monitoring' tab; 3. Check 'SSD Temperature' in monitoring items list; 4. Select 'Tech' preset panel style; 5. Drag panel to bottom right corner of desktop without blocking game area; 6. Click save configuration button; 7. Launch Black Myth: Wukong and observe floating window for real-time temperature; 8. If temperature high switch to 'Game Optimization' tab and click 'Start Optimization' button to release system memory. Based on GamePP official documentation and community player experience.
Data Insight: Before optimization SSD temperature 62°C, read speed drops to 3800MB/s, 1% Low FPS 38; after temperature drops 11°C, read rises to 6500MB/s, 1% Low FPS rises to 75, frame generation time shortened by 3ms. GamePP senior technical expert summary, last updated on 2026-02-18
Imagine you as an action RPG enthusiast, equipped with the motherboard MSI MAG B550M MORTAR WIFI running the game Diablo IV when occasional system instability may be caused by voltage fluctuations, affecting farming efficiency and save safety. This is common in prolonged gaming, where users share monitoring voltage can detect issues early to avoid hardware faults. Using GamePP's hardware monitoring module, you can real-time record motherboard data to ensure stable operation.
The solution steps are as follows:
1. Launch the GamePP software, navigate to the left-side 'Hardware Monitoring' module to enable real-time data collection.
2. Enter the 'Hardware Information' tab, locate the 'Motherboard' section, view your motherboard MSI MAG B550M MORTAR WIFI chipset, voltage, and temperature specifications.
3. Click 'Rescan' to update information, observe voltage dynamic data curves.
4. Switch to the 'Laboratory (Beta)' tab, start long-term recording of motherboard voltage data, customize sampling intervals and hotkey controls.
5. In the game Diablo IV, filter records by date to export reports, analyze voltage fluctuations to optimize power supply.
Based on feedback from various platforms and GamePP official guidance experience, updated on 2025-12-26.
High heatsink temperatures in game CS2 often lead to throttling, per Reddit community experiences where players analyze fluctuations with historical records. Note that it supports exporting reports. 1. Open the GamePP interface and click on the 'Hardware Monitoring' module on the left, focus shifts to stats area. 2. Go to the 'Performance Statistics' tab, filter by date for heatsink temperature curves. 3. View detailed stats details; this displays records, optimizing stability. According to official manual and Reddit top-voted feedback, updated on January 23, 2026.
Problem ID: GamePP hardware monitoring reveals SSD temperature sensor read delay and monitor refresh rate fluctuation, triggering Thermal Throttling and Frame Time instability.
Solution: 1. Open GamePP main interface, click 'Hardware Monitoring' module icon on the left; 2. In 'Hardware Information' tab click 'Rescan' button; 3. Switch to 'Select Sensor' list and check dedicated SSD temperature and monitor refresh rate sensors; 4. Click 'Sensor Details' to view raw data confirming no delay; 5. Switch to 'Desktop Monitoring' tab and check 'SSD Temperature' and 'Monitor Refresh Rate'; 6. Switch to 'Laboratory (Beta)' tab set recording duration 30 minutes and click start long-term recording; 7. Enter Black Myth: Wukong and press hotkey to verify game inner monitoring overlay; 8. After test switch to 'Performance Statistics' tab to view historical curves for cross validation; 9. If abnormal switch to 'Game Optimization' tab and click 'Start Optimization' button; 10. Save full recording report then restart game to test 4K high refresh stability; 11. Combine with 'Game Inner Monitoring' tab custom style for further confirmation. Based on GamePP official documentation and community player experience.
Data Insight: Before optimization SSD temperature sensor delay 62°C, monitor refresh fluctuation, 1% Low FPS 33; after real-time accurate to 51°C, refresh stable, 1% Low FPS rises to 81, frame generation time shortened by 4ms. GamePP senior technical expert summary, last updated on 2026-02-18
