Question 1

How do I fix the bandwidth fluctuations and frame jumps in Expeditions Rome when using Corsair Vengeance DDR5 6000 during huge battles?

Accepted Answer

Managing a massive army was a struggle; every time I rotated the camera quickly, the frame rate would bounce between 50 and 75 FPS, which felt really unstable. The Corsair Vengeance DDR5 6000 96GB kit had some compatibility quirks with my board, causing effective bandwidth to fluctuate between 48GB/s and 55GB/s with very uneven latency distribution. I tried enabling Windows Game Mode, but the jumps persisted—surface tweaks just don't work when you have a bandwidth bottleneck. I went into the BIOS, manually switched the XMP profile to Profile 1, and tweaked the voltage to 1.38V. In RTSS, the frame time variance shrank from 18-32ms down to a tight 20-24ms, and the smoothness improved drastically. I noticed RAM temps climbed from 45℃ to 56℃ after the voltage bump, so I had to crank up my intake fans to balance it out. Now RAM runs at 52-58℃ and the CPU at 65-71℃. Comparative tests confirm the jumps are gone, with frame times stable at 20-24ms.

Question 2

My UE5 demo projects have erratic frame rates during complex scene renders. Fix this now!

Accepted Answer

While running a high-end raytracing demo, the FPS would bounce between 45 and 65 every time I rotated the camera, which made the analysis feel disjointed. The power delivery on the Soyo SY-Yanlong B550M caused the CPU clock to fluctuate between 3.8GHz and 4.4GHz, with a very uneven load distribution across cores. I tried Windows Game Mode, but it did absolutely nothing to fix the underlying hardware scheduling bottleneck. I went into the Advanced Power Options, set the Minimum Processor State to 99%, and used a third-party utility to lock core residency in the high-performance range. RTSS frame time graphs showed the variance shrink from 12-25ms to 14-17ms, which significantly smoothed out the visuals. I noticed my idle CPU temps jumped from 35℃ to 48℃ after locking the cores, so I had to bump up my chassis fan curves to compensate. CPU now runs at 62℃ - 68℃ and the board stays at 50℃ - 55℃. Comparative tests confirm the FPS jitter is gone.

Question 3

Primal Carnage has huge FPS swings during heavy fights on my Colorful H610M-K. Should I check the core residency settings?

Accepted Answer

Fighting off a swarm of dinosaurs is a mess when your frame rate is bouncing between 42 and 58 FPS every time you turn the camera. The VRM on the Colorful H610M-K M.2 V20 is pretty basic, which caused my CPU clocks to wobble between 3.2GHz and 3.7GHz with really uneven core loading. I tried turning on Windows Game Mode, but that was just a placebo—it did nothing for the stutters. I eventually went into Advanced Power Options and set the minimum processor state to 99%, then used a third-party tool to lock core residency into the high-performance range. In RTSS, the frame time variance shrank from 15-30ms to a much tighter 18-22ms. My idle CPU temp jumped from 38℃ to 45℃, so I had to bump up my case fan curves to keep things balanced. Now the CPU runs at 65-71℃, the board is 52-57℃, and frame times are stable at 11-15ms.

Question 4

Why does my Manli RTX 5090 D have frame rate jumps when riding through the open world in Where Winds Meet?

Accepted Answer

Whenever I'm speeding across the map and whip the camera around, the FPS jumps erratically between 110 and 150. It completely kills the immersion. Even with the massive bandwidth of the GDDR7 memory on the Manli RTX 5090 D, the memory controller refresh cycles were swinging between 12-28ms at 4K Ultra, creating uneven data latency. I tried enabling Windows Game Mode, but that did absolutely nothing for the hardware-level bandwidth spikes. I eventually went into the driver panel and manually locked the memory clock to 2100MHz, then updated to the latest Game Ready driver. RTSS showed the frame time variance shrink from a wild 15-30ms down to a stable 18-22ms. The core temp climbed from 65℃ to 72℃ after locking the clocks, so I had to bump the fan curve to compensate. Now VRAM temps sit at 78-84℃ and the core is at 68-74℃. The jumping is gone, and RAM temps are steady at 58-63℃. It's finally the beast I paid for.

Question 5

How do I stop the DeepCool AK500 ARGB from hitting thermal saturation and causing FPS drops in Titanfall?

Accepted Answer

During high-speed mech combat, whenever the scene got intense, my FPS would jump around between 80 and 110, which made the controls feel totally inconsistent. The single-tower design of the DeepCool AK500 ARGB was hitting thermal saturation after about two hours of play, with CPU temps slowly climbing from 70℃ to 88℃, which triggered the clock speed drops. I tried lowering the CPU power limit in Windows, but that just robbed me of 15 FPS without actually solving the heat buildup—it felt like a pointless exercise. I went into the BIOS and moved the fan trigger threshold up to 60℃ and added two intake fans to the front of my case. Checking RTSS frame times, the jitter dropped from 12-28ms down to a tight 14-18ms. The fans were pretty loud at 2000 RPM at first, but I smoothed out the curve and now it's a fair trade-off. The CPU now runs between 75℃ and 81℃, and the VRMs are at 60℃ to 65℃. The stutter is gone, but the noise is still there.

Question 6

When speeding through the city in Neverness to Everness, my drive causes frame jumps. Is it a cache issue?

Accepted Answer

While blasting through the city streets, every time I whipped the camera around, the FPS would bounce between 55 and 80. It completely killed the immersion. The Fanxiang S910PRO 2TB has a large dedicated cache, but when handling the extreme bandwidth of PCIe 5.0, the cache refresh cycle fluctuated between 10-30ms, making data delivery uneven. I tried enabling 'Game Mode' in Windows, but that was just a surface-level fix that did nothing for the hardware bottleneck. I went into the driver panel, switched the cache refresh policy from 'Auto' to 'Manual,' and updated the NVMe driver. RTSS showed the frame time variance shrink from 18-35ms down to a consistent 20-24ms. The image is finally stable. I did notice the SSD temp jump from 55℃ to 68℃ after the change, so I had to crank up my case fans to compensate. Now it runs at 62-68℃ with the heatsink at 50-55℃. Memory temps stay around 58-63℃.

Question 7

I'm seeing huge FPS jumps while walking through mountains in Death Stranding 2 (PC), why is this happening?

Accepted Answer

Whenever I traverse complex terrain and flick the camera, the frame rate bounces between 50 and 75 FPS, which totally kills the immersion. The XMP config on the Asgard Thor DDR5 6400 has some compatibility quirks on certain boards, causing effective bandwidth to fluctuate between 45GB/s and 52GB/s with uneven latency. I tried turning on Windows Game Mode, but it did nothing against a hardware bandwidth bottleneck, which felt pretty hopeless. I eventually went into the BIOS, switched to XMP Profile 1, and bumped the voltage to 1.38V. In RTSS, the frame time variance shrunk from 18-35ms down to 22-26ms. RAM temps climbed from 48℃ to 56℃, so I had to crank up my intake fans to keep things cool. Now it sits at 52-58℃ with the CPU at 65-71℃. The jumps are gone.

Question 8

Nightingale is stuttering during forest scene transitions with Kingbank Yin Jue 3600; is it bandwidth?

Accepted Answer

Exploring the world was a pain; every time I flicked the camera, the frame rate would jump erratically between 40 and 55 FPS. It felt unstable and ruined the immersion. The XMP config on the Kingbank Yin Jue 8GB DDR4 3600 has terrible compatibility with some boards, causing effective bandwidth to swing from 32GB/s to 41GB/s with uneven latency distribution. I tried the 'High Performance' power plan, but that's just a band-aid for a hardware bandwidth bottleneck. I dove into the BIOS, swapped to XMP Profile 2, and bumped the voltage to 1.36V. Using RTSS frame time monitoring, the spikes dropped from 15-30ms to a much tighter 18-22ms. The RAM temps jumped from 42℃ to 51℃, so I had to crank up my intake fans to keep it cool. Now it runs at 48-54℃ with the CPU at 65-71℃. Frame jumping is gone, and the performance is finally verified.

Question 9

Farming Simulator 25 has huge FPS swings during field rendering on my ASRock H310CM-ITX/ac, any fix?

Accepted Answer

When managing my large farm, every time I panned over dense crop areas, the FPS would bounce between 45 and 60, which felt really choppy. The ASRock H310CM-ITX/ac has a very basic power delivery system, causing the CPU clock to flutter between 3.1GHz and 3.6GHz with terrible single-core distribution. I tried turning on 'Game Mode' in Windows, but that surface-level tweak was useless for such old hardware. I ended up going into Advanced Power Options, setting the minimum processor state to 99%, and used a third-party tool to lock the core residency in the high-performance range. In RTSS, the frame time variance dropped from 12-25ms down to a stable 14-17ms. I noticed my idle temps jumped from 35℃ to 48℃ after the lock, so I had to bump up my case fan thresholds to compensate. Now the CPU runs at 62-68℃ and the motherboard stays around 50-55℃. The stuttering is gone, though the fans are a bit louder now.

Question 10

I'm seeing weird frame rate jumps while sprinting across the map in Battlefield V with a FireCuda 540. Is this a cache issue?

Accepted Answer

In the middle of a firefight, every time I flicked my view, the FPS would bounce between 70 and 100. It felt jittery and ruined my aim. The Seagate FireCuda 540 2TB has a fast cache, but under PCIe 4.0 loads, the cache refresh cycle was fluctuating between 15-35ms, causing uneven data delivery. I tried enabling 'Game Mode' in Windows, but it did nothing—just another useless software toggle. I finally went into the driver panel, changed the cache flush policy from 'Auto' to 'Manual', and updated the NVMe driver to the latest version. In RTSS, the frame time variance shrank from a 20-40ms range to a tight 22-28ms. The smoothness is night and day. My SSD temp did climb from 52℃ to 65℃ after the tweak, so I had to crank up my case fans to compensate. Now it runs at 58-65℃ with the heatsink at 48-55℃. The game finally feels responsive to my inputs.

GamePP Frequently Asked Questions

How to display motherboard ASUS TUF GAMING B850M-PLUS WIFI temperature information in PUBG using GamePP to read peripheral parameters?

My motherboard MSI B650M GAMING PLUS WIFI seems mismatched in specs for Disco Elysium, how to read board info with GamePP?

How to read RAM usage logs for Crucial Pro DDR5 6000 32GB in GamePP during Palworld sessions?

How to record cooler Thermalright Peerless Assassin 120 SE ARGB performance data in Apex Legends with GamePP to monitor peripheral temperature?

My monitor HKC C349U has wrong resolution in Caves of Qud, how to view monitor specs with GamePP?