GamePP Frequently Asked Questions - Professional Hardware Monitoring Software FAQ Knowledge Base

It was unbelievable—walking through the fog and the screen just starts skipping frames twice a second. It felt like I was playing a slideshow. I checked the memory status on my ASUS B760M-PLUS D4 and saw the XMP frequency was bouncing between 3200 MHz and 2666 MHz, causing the CPU to just sit there waiting for data. I tried switching the Windows power plan to 'High Performance,' but that just wasted electricity and did absolutely nothing for the stutters. I went straight into the BIOS, killed the auto-overclock, and manually locked the timings to 16-18-18-36 while bumping the voltage from 1.35V to 1.38V. In AIDA64, the memory latency dropped from 85ns to a stable 72ns, and the skipping stopped. The worst part was I fat-fingered the voltage on my first try, which triggered the motherboard protection and rebooted me three times—gave me a heart attack. VRM temps are around 52-58℃. Exported the logs from Event Viewer and everything looks clean now. Last updated onApril 25, 2026 8:30 PM.

I can't believe a 1TB branded drive made me wait nearly 20 seconds just to load a star map. It's a joke. The SLC cache on the Zhitai TiPro9000 gets hijacked by background apps, and the write speed just falls off a cliff from 7000MB/s to about 1200MB/s. This makes loading feel incredibly fragmented. I tried running a defrag in Disk Management, which was a huge mistake—you don't defrag an NVMe drive. It didn't help and just added unnecessary wear. I finally installed the latest official drivers and changed the Windows write caching policy to 'force flush'. In CrystalDiskMark, my 4K random reads jumped from 55MB/s to 72-78MB/s, and load times dropped to 6 seconds. Interestingly, the drive hit 72℃ right after the driver tweak, so I had to slap on an aluminum heatsink to bring it back to 58-63℃. The read/write curve is finally stable. Exported the logs and the cache scheduling is now optimized. Last updated onMarch 23, 2026 3:54 PM.

This was insane—every time a massive physics collapse happened in the tomb scenes, my PC would just black screen and reboot. It felt like a random crash simulator. I monitored the Huntkey Blizzard T600 12V rail and saw transient spikes between 450-480W, causing the voltage to swing wildly from 11.4V to 12.2V. I tried capping the GPU power limit to 80%, which stopped the crashes but tanked my FPS from 90 to 55—basically unplayable. I eventually swapped to original modular cables and forced the Windows power plan to 'Ultimate Performance' to raise the voltage floor. In my logs, the 12V ripple dropped from 85mV to 42mV, and the crashes vanished over a four-hour stretch. The funniest part was that I spent half an hour reseating my RAM three times thinking they were loose, which did absolutely nothing. Now the PSU fan just hums along at 800-1100 RPM with internal temps around 42-48℃. Event Viewer shows no more power errors, and the fan is steady at 1400-1600RPM. Last updated onMarch 24, 2026 11:26 AM.

I couldn't believe a top-tier drive was letting my frames tank to 40 in the snow mountains; it felt like a joke. The WD SN850X 1TB has great throughput, but when handling tons of small files, the system priority was being hijacked by my background antivirus. In a moment of stupidity, I cranked the in-game settings to Ultra, which just made the stuttering worse. I finally went into Task Manager, forced the game process I/O priority to 'High', and disabled all real-time disk scanning. In the monitor, the read/write latency dropped from 35ms to a crisp 8-12ms. I did hit a brief system deadlock right after the first tweak, but a reboot and disabling 'Fast Startup' cleared it right up. The drive is running between 55-62℃, so the heatsink is definitely working. I exported the performance logs, and the scheduling is finally behaving. Last updated onApril 16, 2026 10:09 AM.

It was absolutely ridiculous; every time I was sprinting toward the finish line, the game would just skip frames—like three times a second. It felt like I was playing a low-budget slideshow. I checked the latency on my 8GB G.Skill Trident sticks and saw it swinging wildly between 75ns and 110ns during heavy environment streaming, which basically throttled my CPU. I tried the 'Ultimate Performance' power plan in Windows, but all that did was make my fans sound like a jet engine while the stuttering stayed exactly the same. I went straight into the BIOS, pushed the memory voltage from 1.2V to 1.35V, and set the game process priority to 'High' in Task Manager. According to RTSS, my 1% lows jumped from 22 FPS to 41 FPS, and the screen finally stopped twitching. I actually fat-fingered the voltage setting the first time and got five BSODs in a row, which was terrifying. RAM temps are now 42-48℃, and fan speeds are steady at 1400-1600RPM. Last updated onMarch 30, 2026 1:42 PM.

Back to Top