GamePP Frequently Asked Questions

While galloping through the countryside, distant buildings would suddenly turn into blurry blobs, which completely killed the immersion. Looking at the logs, the Kioxia G4 was hitting 2-3 brief PCIe link resets during heavy loads, interrupting the data stream. I first tried lowering the texture quality in-game, but the graphics looked like something from ten years ago, and I wasn't about to settle for that. I downloaded the latest official firmware and changed the PCIe signal strength from 'Auto' to 'Strong' in the BIOS, locking the link speed to Gen 5. In 3DMark storage benchmarks, sequential reads stabilized around 10500MB/s, and the texture popping vanished. I did have a weird issue where the drive had a recognition delay on cold boots after the update, but disabling 'Fast Boot' in the BIOS cleared it up. Temps are sitting at 50-56℃, and the drive feels incredibly responsive. Loading speeds are way up, with temps holding at 50-56℃. Last updated onMarch 25, 2026 8:17 PM.

The drop in the temperature curve was honestly shocking; once I set the pump to full speed, the core temp plummeted from 82℃ to 65℃, which was a huge relief. The Valkyrie V360's 'Smart Mode' hesitates between 2000 - 3000 RPM during sudden power spikes, causing heat to pool at the cold plate. I first tried lowering the CPU power limit via software, but that cost me 15 FPS—a reverse optimization that left me staring at my screen in disbelief. I jumped into the BIOS, flipped the pump strategy from Smart to Full Speed, and bumped the radiator fan pressure curve by 15%. Monitoring the temps, the peak dropped from 82℃ to a steady 68℃ - 73℃, and the stuttering vanished. I noticed a slight high-pitched whine when I first hit full speed, but a tiny voltage tweak to 1.35V quieted it down. The liquid temp is now stable at 32℃ - 38℃. The internal monitor confirms the mode switch worked, and the core is staying between 62℃ - 68℃. Last updated onApril 8, 2026 9:37 AM.

The feeling of Kratos leaping across the World Tree is absolutely electric once you get the loading right. By default, the Kioxia EXCERIA PRO 1TB only allocates 64MB for HMB cache, which caused peak delays of 110ms - 130ms when streaming 4K textures. I tried disabling all background Windows updates, but that only shaved off 0.2 seconds—hardly a solution. I ended up using a registry tweak to force the HMB cache up to 256MB and switched my power plan to 'Ultimate Performance'. In 3DMark storage benchmarks, the sequential read speed stabilized at 7.1GB/s - 7.3GB/s, up from 6.2GB/s. I did have a moment of panic when the system hung at the motherboard logo after the registry edit, but booting into Safe Mode and restoring the startup items saved me. Temps are stable at 52℃ - 58℃. Using the in-game load timer, I confirmed the transition is now instant, though the registry editing process was a bit tedious. Last updated onApril 6, 2026 2:23 PM.

When driving into the deep rainforest, the metallic textures just turned into blurry blobs, which was honestly a disaster. The 8GB on the Zotac RTX 2060 Super Supreme Plus is struggling with memory fragmentation in this engine, causing texture load delays to jump between 200-400ms. I tried cranking texture filtering to the max in the driver, but that just pushed VRAM to 7.9GB and caused the game to freeze every five minutes. I ended up nuking 4.2GB of shader cache and switching the NVIDIA power management to 'Prefer Maximum Performance' to keep the VRAM clocks high. After comparing screenshots, the sharpness is way better and load times dropped to 50-80ms. I noticed the game took forever to launch after the first wipe, but once the shaders recompiled, the fluidity was a night-and-day difference. Core temps are stable at 66-72℃ with fans at 1600 RPM. Frame times are now sitting at 5.1-6.4ms, though the card is definitely working hard. Last updated onMarch 20, 2026 1:46 PM.

I finally found a way to break the loop, but my CPU was dancing on the edge of 95℃, which was honestly a bit stressful. The issue was the 'Smart Mode' on the V360 MIST; the pump had a 3-5 second response lag during load spikes, causing heat to pile up at the block. I tried cranking the radiator fans to 2200 RPM, but it was just loud as hell and only dropped the temp by 2℃—totally useless. I finally went into the BIOS and locked the pump speed at a flat 100%, then switched the fan trigger to be based on coolant temp instead of CPU temp. The core temps plummeted from 95℃ to a much safer 72℃ - 78℃, and the clock speed stopped jumping. I did get a slight coil whine from the pump after locking it, which I only managed to dampen by switching my Windows power plan to 'Balanced'. Coolant stays between 35℃ - 42℃. Switched the software to manual mode, and the CPU now sits at 68℃ - 75℃. Last updated onMarch 7, 2026 7:57 PM.